Bike planters are becoming a staple in the bike world and for good reason: they’re super easy to build and very simple to use.
And they are very affordable.
So why not build one to go with your bike?
We’ve put together a simple guide to building a bike bike planer.
If you’re building your own bike plan, we’d love to hear from you.
You can also use the links below to see how to build your own planter and get help with it.1.
Purchase your planter materials and toolsHere’s what you need to buy:The planter frame.
You will want a sturdy frame for the wheels, and preferably some sort of durable material that won’t flex or bend.
The best option is the Bicycle Wheel Tool or Bike Wheel Planter.
It’s available at many local hardware stores and online at Amazon, Lowe’s, Walmart, and most sporting goods stores.
It can be used to build the wheels of the bike.
The planters wheels.
You’ll need a set of wheels that will be a good match for the bicycle you plan to ride.
We recommend 2.5 to 3 inches wide and 1 inch thick, or the same width and thickness you would use for a bicycle wheel.
The bigger the wheels are, the better, so we recommend the smaller wheels.
We also recommend using a pair of safety pins.
You may want to invest in a set that can be secured with a metal bracket.
You could buy a set from Bicycle Safety for $12.95 or buy one at Bicycle Center for $18.95.
Your planter wheel planter should be sturdy enough to support a bike without wobbling.
You might need to add some wheels for the front wheels or maybe a bit more for the rear wheels.
We suggest you buy 2 or 3 of the same size for the bike you’re planning to ride, as well as a set with a few more wheels for each wheel.
For the frame: We recommend 3-4 inch x 2-inch x 6-inches.
A 12-foot long frame will fit your planer wheel.
You can buy 2-piece metal frame planters for around $40 at most hardware stores.
You should also look for one with a 6-inch thick top and one that is 6-7 inches tall.
The frame you choose will determine the size of your wheels.
The size of the wheels you need will depend on the width of your plan.
We strongly recommend choosing a frame that is at least 4 inches wide.
You will need a planter pole.
We like the Bicycle Wire Pole, which is about $15, but you could also buy a planer pole that’s a little more expensive.
We also recommend a 5-foot piece of 1/4 inch plywood to hold your planters wheel.
For a 5.5-inch planter Pole, you will need to use 3-inch wide planter poles to get a 6.5 inch tall planer (the planter itself will measure about 6 inches wide).
For a 7-inch pole, you’ll need to purchase 2-foot wide planters.
You may want a set for your bike that can’t be moved.
The bike wheel planer is a great way to make your plan a little easier to ride without worrying about wheels shifting and falling off.
If your plan is shorter than your bike, it may be easier to fit the planer on a bicycle frame.
If it’s longer, you may need to trim off some of the planter or replace it with a shorter planter.
We highly recommend a set made from a thick piece of plywood and wood screws to secure the planters foot.
For this project, we used a 3-foot planter to make a 5 foot planer, and it cost us about $20.
You’ll need some kind of clamp or bracket to hold the planers foot.
You need a 4-inch bolt and a 2-1/4-inch stud to hold it in place.
We used a 2×4 planer with 2-by-2 holes for $10.
If using a frame, we recommend using the same length planter as your bike to help keep it stable and to help hold it together.
For most plans, a 5/8-inch hole in the plan will give you a good fit, but a 3/4 hole may be more snug.
For the plan, you can cut it to fit around the wheel.
We recommend a safety pin for attaching your planers frame to your bike.
You won’t need to get this with a frame planer because it’ll work on both.
It’ll be helpful if you’re using a set to help secure the frame planter in place on your bike frame.2.
Drill holes for your wheelsYou want to make sure your plan can support the wheel you’re riding.
The hole size you use will depend a